Samson S2000 Instructions d'exploitation télécharger pdf (Page 28)

4.4 Attachment to Type 3510

Micro-flow Valve

Refer to Table 3 on page 44 for the required

mounting parts as well as the accessories

with their order numbers.

Note the travel table on page 15.

1. Screw bracket (9.1) to the stem connec

tor (9).

2. Fasten the two pins (9.2) to the bracket

(9.1) on the stem connector. Mount the

follower plate (3) and fasten it using the

screws (9.3).

3. Mount the travel indication scale (acces

sories) to the outer side of the yoke using

the hex screws (12.1), ensuring that the

scale is aligned with the stem connector.

4. Fasten the hex bar (11) onto the outer

side of yoke by screwing the M8 screws

(11.1) directly into the holes on the

yoke.

5. Fasten the bracket (10) to the hex bar

(11) using the hex screw (10.1), washer

and tooth lock washer.

6. Mount connecting plate (6) or pressure

gauge bracket (7) with pressure gauges

(8) on the positioner, making sure both

seal rings (6.1) are seated properly.

7. Unscrew the standard installed lever M

(1) including follower pin (2) from the

positioner shaft.

8. Take lever S (1) and screw follower pin

(2) in the bore for pin position 17.

9. Place lever S on the positioner shaft and

screw tight using the disk spring (1.2)

and nut (1.1).

Move lever once all the way as far as it

will go in both directions.

10. Place positioner on the bracket (10) in

such a manner that the follower pin

slides into the groove of the clamp (3).

Adjust the lever (1) correspondingly.

Screw the positioner to the bracket (10)

using both its screws.

28 EB 8384-4 EN

Attachment to the control valve – Mounting parts and accessories

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 123 124

Commentaires sur ces manuels

Pas de commentaire

Samson S2000 Instructions d'exploitation Page 28

Commentaires sur ces manuels

Produits connexes et manuels pour Amplificateurs audio Samson S2000