Samson DOUBLE BRAID Class II Eye Splice Modified for TS-I Manuel d'utilisateur télécharger pdf

PAGE 1 OF 5

SamsonRope.com | Email [email protected] | Tel +1.360.384.4669

Double Braid Class II Eye Splice Modiﬁed for TS-II and TS-II Premium

SAMSON SPLICING INSTRUCTIONS

For all measurements use d 1 size larger than rope.

Note: For 1/2" use 9/16" d, for 5/8" use 3/4" d, etc.

step

Tie the rope to a xed object approximately 12 d lengths

from the end, then place pin through cover and core near knot.

Slide taped end of cover back from end of core. Measure 1/4 d length

from end of exposed core and make a mark. Cut core off at mark.

Leaving a small amount of core protruding from cover, grasp the taped end

tightly with one hand, and with the other hand milk the cover back towards the

pin. Pin back cover slack. Place second pin to hold back cover slack.

Note: Fid length for measurement

purposes is 21 x rope diameter.

Example: For 5/8" rope use 3/4" ﬁd.

Fid length = .75 x 21 or 15.75"

1/4 ﬁd length

Cut here

Toward pin

First pin

Second pin

knot

PREPARING THE ROPE

From taped end, measure 1 d length and make Mark 1. From Mark 1, measure

another d length and make Mark 2. From Mark 2, form desired eye size and make

Mark 3. At Mark 3, press felt pen through cover and make a mark on the core.

step

Straighten the rope out and place a pin through cover and core between

Marks 2 and 3. Remove the pin holding back the extra cover slack and milk

the cover slack back towards Mark 3.

Mark 2

Mark 1

Mark 3

Mark 1Mark 2Mark 3

Cover slack

MEASURING AND MARKING

1 2 3 4 5

Résumé du contenu

Page 1 - MEASURING AND MARKING

PAGE 1 OF 5SamsonRope.com | Email [email protected] | Tel +1.360.384.4669Double Braid Class II Eye Splice Modiﬁed for TS-II and TS-II Premiu

Page 2 - MARKING THE CORE

PAGE 2 OF 5SamsonRope.com | Email [email protected] | Tel +1.360.384.4669Double Braid Class II Eye Splice Modiﬁed for TS-II and TS-II Premiu

Page 3 - TAPERING THE COVER

PAGE 3 OF 5SamsonRope.com | Email [email protected] | Tel +1.360.384.4669Double Braid Class II Eye Splice Modiﬁed for TS-II and TS-II Premiu

Page 4 - INSERTING COVER INTO CORE

PAGE 4 OF 5SamsonRope.com | Email [email protected] | Tel +1.360.384.4669Double Braid Class II Eye Splice Modiﬁed for TS-II and TS-II Premiu

Page 5 - FINISHING THE SPLICE

PAGE 5 OF 5SamsonRope.com | Email [email protected] | Tel +1.360.384.4669Double Braid Class II Eye Splice Modiﬁed for TS-II and TS-II Premiu

Plus de documents pour Outils Samson DOUBLE BRAID Class II Eye Splice Modified for TS-I

Voir le document Samson DOUBLE BRAID Class II Eye Splice Modified for TS-I Manuel d'utilisateur

Samson DOUBLE BRAID Class II Eye Splice Modified for TS-I Manuel d'utilisateur (8 pages)

Commentaires sur ces manuels

Pas de commentaire

Samson DOUBLE BRAID Class II Eye Splice Modified for TS-I Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Outils Samson DOUBLE BRAID Class II Eye Splice Modified for TS-I. Samson DOUBLE BRAID Class II Eye Splice Modified for TS-II and TS-II Premium User Manual [en] Manuel d'utilisatio

Résumé du contenu

Plus de documents pour Outils Samson DOUBLE BRAID Class II Eye Splice Modified for TS-I

Commentaires sur ces manuels

Produits connexes et manuels pour Outils Samson DOUBLE BRAID Class II Eye Splice Modified for TS-I