Samson 1400 Instructions d'exploitation télécharger pdf (Page 80)

Error codes – Recommended action Condensed state message active, when prompted, Err appears.

When fault alarms exist, they are displayed here.

Hardware

Additional alarm at the fault

alarm output

Initialization key jammed (firmware version 1.51 and higher)

A hardware error has occurred, the positioner changes to the

fail-safe position (SAFE)

Status classification Maintenance alarm (cannot be classified)

Recommended action Confirm error and return to the automatic operating mode, or

perform a reset and re-initialize the device. If this is not success

ful, return device to SAMSON AG for repair.

Data memory

Additional alarm at the fault

alarm output

The writing of data to the data memory does not work anymore,

e.g. when the written data deviate from the read data.

Valve moves to the fail-safe position.

Status classification Maintenance alarm (cannot be classified)

Recommended action Return the positioner to SAMSON AG for repair.

Test calculation

Additional alarm at the fault

alarm output

The hardware controller is monitored by means of a test

calculation.

Status classification Maintenance alarm (cannot be classified)

Recommended action Confirm error. If this is not possible, return the positioner to

SAMSON AG for repair.

80 EB 8387-3 EN

Code list

1 2 ... 75 76 77 78 79 80 81 82 83 84 85 ... 99 100

Pas de commentaire

Samson 1400 Instructions d'exploitation Page 80